Mô tả

Functional principle: Photoelectric proximity sensor
Functional principle detail: Background suppression, Foreground suppression, MultiMode
MultiMode:
-Background suppression
-Foreground suppression
-1-point teach-in
-2-point teach-in
-Manual teach-in
-ApplicationSelect (Mode 1 – Speed, Mode 2 – Standard, Mode 3 – Precision)
-Measurement
Sensing range :
-Sensing range min.: 25 mm (Mode 1 – Speed)
25 mm (Mode 2 – Standard)
25 mm (Mode 3 – Precision)
-Sensing range max.: 300 mm (Mode 1 – Speed)
500 mm (Mode 2 – Standard)
700 mm (Mode 3 – Precision)
-Adjustable switching threshold for background suppression: 25 mm … 300 mm (Mode 1 – Speed)
25 mm … 500 mm (Mode 2 – Standard)
25 mm … 700 mm (Mode 3 – Precision)
-Reference object: Object with 90% remission factor (complies with standard white according to DIN 5033)
-Minimum distance between set sensing range and background (black 6% / white 90%): 6 mm, at a distance of 250 mm (Mode 1 – Speed)
8 mm, at a distance of 400 mm (Mode 2 – Standard)
10 mm, at a distance of 500 mm (Mode 3 – Precision)
-Recommended sensing range for the best performance: 50 mm … 250 mm (Mode 1 – Speed)
50 mm … 400 mm (Mode 2 – Standard)
50 mm … 500 mm (Mode 3 – Precision)
Distance value:
-Measuring range: 25 mm … 700 mm
-Resolution: 1 mm
-Repeatability: < 0.5 % (90% remission factor) (Equivalent to 1 σ) (Observe min. warm-up time of 15 minutes)
-Accuracy: < 4 % (90% remission factor)
-Distance value output: Via IO-Link + display
Emitted beam:
-Light source: Laser
-Type of light: Visible red light
-Shape of light spot: Point-shaped
-Light spot size (distance): Ø 0.4 mm (250 mm)
-Maximum dispersion of the emitted beam around the standardized transmission axis (squint angle): < +/- 1.0° (at Ta = +23 °C)
Key laser figures :
-Normative reference: IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11, EN 60825-1:2014, IEC 60825-1:2014 (except for tolerances according to Laser Notice No. 56 dated May 8, 2019)
-Laser class: 1
-Wave length: 655 nm
-Pulse duration: 4 µs
-Maximum pulse power: < 2.5 mW
-Average service life: 50,000 h at TU = +25 °C
Smallest detectable object (MDO) typ. :
-0.6 mm (at a distance of 250 mm)
-Object with 90% remission factor (complies with standard white according to DIN 5033)
Adjustment :
-Touch display: For setting the sensing range and configuring the sensor parameters
-IO-Link: For configuring the sensor parameters and Smart Task functions
Indication:
-Display: Display of mode, display of output states, display of the distance value, display of the set value
-LED green: Operating indicator
Static on: power on
Flashing: IO-Link mode
-LED yellow: Status of received light beam
Static on: object present
Static off: object not present
Special features: MultiMode
Special applications: Detecting small objects, Detection of objects moving at high speeds, Detecting flat objects, Detecting uneven, shiny objects, Detection of poorly remitting and tilted objects
Supply voltage UB: 10 V DC … 30 V DC (Limit values)
Ripple: ≤ 5 Vpp
Current consumption: ≤ 25 mA, without load. At UB = 24 V
Protection class: III
Digital output:
-Number: 2
-Type: Push-pull: PNP/NPN, Individually adjustable
-Switching mode: Light/dark switching
-Output characteristic: Individually adjustable
-Signal voltage PNP HIGH/LOW: Approx. UB-2.0 V / 0 V
-Signal voltage NPN HIGH/LOW: Approx. UB-1.0 V / < 2.5 V
-Output current Imax.: ≤ 100 mA
-Circuit protection outputs: Reverse polarity protected
Overcurrent protected
Short-circuit protected
-Response time: 1.8 ms, 5 ms, 15 ms (Mode 1 – Speed, Mode 2 – Standard, Mode 3 – Precision) (Signal transit time with resistive load in switching mode)
-Repeatability (response time): < 0,5 %
-Switching frequency: 275 Hz, 100 Hz, 30 Hz (Mode 1 – Speed, Mode 2 – Standard, Mode 3 – Precision) (With light/dark ratio 1:1)
Housing: Rectangular
Dimensions (W x H x D): 18 mm x 57 mm x 42.2 mm
Connection: Male connector M12, 4-pin
Material:
-Housing: Metal, Stainless steel V4A (1.4404, 316L)
-Front screen: Plastic, PMMA
-Display cover: Plastic, PMMA
-LED: Plastic, ABS
-Male connector: Metal, Stainless steel V4A (1.4404, 316L)
Weight: Approx. 100 g
Maximum tightening torque of the fixing screws: 0.56 Nm