Mô tả

Pulses per revolution: 2,000 (See maximum revolution range)
Measuring step: 90°, electric/pulses per revolution
Measuring step deviation at non binary number of lines: ± 0.2°
Error limits: ± 0.3°

Communication interface: Incremental
Communication Interface detail: HTL / Push pull
Number of signal channels: 6-channel
Initialization time: 40 ms
Output frequency: ≤ 300 kHz
Load current: ≤ 30 mA
Power consumption: ≤ 0.5 W (without load)

Connection type: Cable, 8-wire, universal, 1.5 m Z (The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction)
Supply voltage: 10 … 32 V
Reference signal, number: 1
Reference signal, position: 90°, electric, logically gated with A and B
Reverse polarity protection: ✔
Short-circuit protection of the outputs: ✔ (Short-circuit opposite to another channel, US or GND permissable for maximum 30s)

Mechanical design: Through hollow shaft
Shaft diameter: 8 mm
Weight: + 0.2 kg
Shaft material: Stainless steel
Flange material: Aluminum
Housing material: Aluminum die cast
Start up torque: 0.8 Ncm (+20 °C)
Operating torque: 0.6 Ncm (+20 °C)
Permissible movement static: ± 0.3 mm (radial) / ± 0.5 mm (axial)

Permissible movement dynamic: ± 0.1 mm (radial) / ± 0.2 mm (axial)

Operating speed: ≤ 6,000 min⁻¹ (Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range)
Moment of inertia of the rotor: 40 gcm²
Bearing lifetime: 3.6 x 10^10 revolutions
Angular acceleration: ≤ 500,000 rad/s²

EMC: According to EN 61000-6-2 and EN 61000-6-4
Enclosure rating: IP65, housing side, cable connection (IEC 60529) / IP65, shaft side (IEC 60529)

Permissible relative humidity: 90 % (Condensation not permitted)
Operating temperature range: 0 °C … +85°C
Storage temperature range: –40 °C … +100°C, without package
Resistance to shocks: 50g, 6 ms (EN 60068-2-27)
Resistance to vibration: 20g, 10 Hz … 2,000 Hz (EN 60068-2-6)